Ошибки и ремонт ЧПУ MAZAK в Кульсарах

Ремонт CNC MAZAK

Ремонт ЧПУ MAZAK

Компания «Кернел» производит ремонт станков оснащеных системой ЧПУ MAZAK с 2002 года. За это время мы восстановили десятки станков оборудованных данными системами, и накопили колоссальный опыт в том числе опыт в ремонте CNC MAZAK. Ремонт подобной промышленной электроники ответственное и сложное занятие, требующие полной отдачи и профессионализма, а так же максимально полной материальной базе.

Ремонт ЧПУ MAZAK в Кульсарах производится как в сервисном центре, так и с выездом специалиста на территорию заказчика. ЧПУ MAZAK, является крайне сложной промышленной электроникой, соответственно ремонт CNC MAZAK можно доверить только настоящим профессионалам своего дела, с богатым опытом работы в данном направлении.

Все специалисты сервисного центра "Кернел" имеют высшее техническое образование, огромный опыт и максимально полную материальную базу включая новейшее высокотехнологичное диагностическое оборудование, благодаря чему ремонт ЧПУ MAZAK в Кульсарах проходит максимально эффективно.

Ремонт CNC MAZAK

Инженеры сервисного центра уделяют максимальное внимание к качеству исполнения ремонта, программирования и настройке ЧПУ, не зависимо от производителя данного промышленного оборудования. Именно поэтому мы смело даем гарантию на ремонт CNC MAZAK, гарантия также распространяется на замененные в процессе ремонта компоненты и составляет шесть месяцев.

Особое внимание заслуживает тот факт, что ремонт ЧПУ MAZAK в Кульсарах производится исключительно с использованием оригинальных запасных частей, на компонентном уровне с применением высокотехнологичного оборудования, квалифицированным персоналом с инженерным образованием.

Если на вашем производстве появились проблемы с ЧПУ MAZAK, которые вы не можете решить самостоятельно, мы всегда рады вам помочь. Обращайтесь в сервисный центр "Кернел".

Специалисты нашей компании в минимальные сроки проведут глубокую диагностику ЧПУ и последующий ремонт CNC MAZAK. Оставьте заявку на ремонт ЧПУ MAZAK в Кульсарах, используя форму на сайте.

Коды ошибок ЧПУ MAZAK MAZATROL M-32B

Ошибки процессора системы NC

Код
ошибки		ОписаниеУстранение

001

WATCH DOG 1

 The NC system was not able to process data within unit processing time. Please contact the nearest MAZAK service center.

002

SYSTEM ERROR

 A problem has occurred in the NC system software. Please contact the nearest MAZAK service center.

003

MEMORY PARITY

 The contents of the memory within the NC system (operation instructions or data) have been destroyed. Please contact the nearest MAZAK service center.

004

MEMORY GUARD

 A defect(s) is encountered in the system software or custom option software. Please contact the nearest MAZAK service center.

005

ZERO DIVISION

 Illegal data (such as zero-division) is included in either the parameter, machining program or other data. Check the parameter set, machining program etc. for correctness.

006

SYSTEM LOADING ERROR

 The system software stored on the floppy disk has been destroyed . Or a malfunction has occurred in the floppy disk unit. The floppy disk or the disk unit (including the card) needs replacing. Please contact the nearest MAZAK service center.

007

SUM CHECK (CRC) ERROR

 The contents of the system software and/or custom software have been destroyed. Please contact the nearest MAZAK service center.

008

BATTERY ALARM

 The battery provided to retain parameters, machining programs and other types of data within the NC system has reached the minimum voltage level permissible or has run down. Make sure to check the machining data for possible loss and that the battery is recharged or replaced. For battery recharging or replacement, refer to the relevant description given in the Maintenance Manual.

009

SPNDL.CONTROL. (IC MAC 012) ALARM

 The IC MAC 012 on the control printedcircuit board has not correctly operated. Replace the SF-CA card.

010

SPNDL SPEED ERROR

The difference between the designated speed and the motor speed has exceeded the required value because of:

  1. Spindle overload
  2. Speed detection encoder error
  3. Card malfunction
 For 1. above, reduce the load.
For 2. above, replace the speed detection encoder.
For 3. above, replace the FS-CA card.

011

WATCH DOG 1

 The NC system was not able to process data within unit processing time. Please contact the nearest MAZAK service center.

012

SYSTEM ERROR

 An error(s) has occurred in the software of the NC system. Please contact the nearest MAZAK service center.

013

MEMORY PARITY

 The contents of the memory within the NC system (operation instructions or data) have been destroyed. Please contact the nearest MAZAK service center.

014

MEMORY GUARD

 A defect(s) is included in the system software or custom software. Please contact the nearest MAZAK service center.

015

ZERO DIVISION

 Illegal data (such as zero-division data) is included in either the parameter set, machining program or other types of data. Check if “0” data is included in the parameter set, machining program or other types of machining data, and then correct it if such data is present.

016

SYSTEM LOADING ERROR

 The system software stored on the floppy disk has been destroyed. Or a malfunction has occurred in the floppy disk unit. The floppy disk or the disk unit (including the card) needs replacing. Please contact the nearest MAZAK service center.

017

SUM CHECK (CRC) ERROR

 The contents of the system software and/or custom software have been destroyed. Turn power off and then back on. If this does not clear the error status, please contact the nearest MAZAK service center.

018

BATTERY ALARM

 The NC system battery provided to retain parameter, machining program and other types of data has reached the minimum permissible voltage level. It is required that the machining data is rechecked for possible damage when the battery is recharged or replaced. For the battery recharging or replacement procedure, please see the Maintenance Manual.

Ошибки привода оси и шпинделя

Код
ошибки		ОписаниеУстранение

019

SPNDL CONTROL. (BREAKER TRIP)

Electrical current exceeding the set value has occured (Spindle converter circuits)

  1. Power transistor damage
  2. Motor overload
  3. Wrong motor wiring
  4. Motor coil layer short-circuit
  5. Insufficient power capacity
  6. Abnormal line voltage waveform
  7. Abnormal line frequency (±3%)
  8. Current detector circuit fault
  1. Replace the power transistor
  2. Reduce the load
  3. Correct the wiring
  4. Replace the motor
  5. Increase the power capacity
  6. Increase the power capacity or use larger-sized cables
  7. Improve the fluctuation state of the frequency
  8. Replace the SF-CA card

020

SPNDL (CONVERTER OVERCURRENT)

Electrical current exceeding the set value has occured (Spindle converter circuits)

  1. Power transistor damage
  2. Motor overload
  3. Wrong motor wiring
  4. Motor coil layer short-circuit
  5. Insufficient power capacity
  6. Abnormal line voltage waveform
  7. Abnormal line frequency (±3%)
  8. Current detector circuit fault
  1. Replace the power transistor
  2. Reduce the load
  3. Correct the wiring
  4. Replace the motor
  5. Increase the power capacity
  6. Increase the power capacity or use larger-sized cables
  7. Improve the fluctuation state of the frequency
  8. Replace the SF-CA card

021

INSUFFICIENT VOLTAGE

 The three-phase input supply voltage has decreased below 160V (±5V). Check the input voltage, and then increase it to 200/220V (+10 -15%)

022

MOMENTAR, POWER DOWN

 The supply voltage has temporarily decreased below the minimum permissible level. Adjust the power supply.

023

ILLEGAL MEMORY 1

 A malfunction(s) has occurred in the control card of the servo amplifier, the internal cables or the connectors. Please contact the nearest MAZAK service center.

024

EXTERNAL CLOCK MALFUNCTION

 A malfunction(s) has occurred in the NC, the servo amplifier control card, the internal cables or the connectors. Please contact the nearest MAZAK service center.

025

WATCH DOG

 A malfunction(s) has occurred in the NC, the servo amplifier control card, the internal cables or the connectors. Please contact the nearest MAZAK service center.

026

ILLEGAL MEMORY 2

 A malfunction(s) has occurred in the NC, the servo amplifier control card, the internal cables or the connectors. Please contact the nearest MAZAK service center.

027

MAGNETIC POSITION DETECT MALF

 A malfunction(s) has occurred either in the detectors (or cables) fitted to the servo motor or in the servo amplifier. Or the machine parameter settings for the servo system include an error(s). Please contact the nearest MAZAK service center.

028

PRINT CIRCUIT BOARD MALF

 A malfunction(s) has occurred in the control card of the servo amplifier. Please contact the nearest MAZAK service center.

029

DETECTING NO SIGNAL 1

 A malfunction(s) has occurred either in the detectors (or cables) fitted to the servo motor or in the servo amplifier. Or the machine parameter settings for the servo system include an error(s). Please contact the nearest MAZAK service center.

030

DETECTING NO SIGNAL 2

 A malfunction(s) has occurred either in the detectors (or cables) or the servo amplifier. Or the machine parameter settings for the servo system include an error(s). Please contact the nearest MAZAK service center.

031

DETECTING NO SIGNAL 3

 A malfunction(s) has occurred either in the detectors (or cables) or the servo amplifier. Or the machine parameter settings for the servo system include an error(s). Please contact the nearest MAZAK service center.

033

DETECTING NO SIGNAL 5

 - -

034

BATTERY MALFUNCTION

 The absolute-value detector circuit backup battery for the servo amplifier control card has run down. Please contact the nearest MAZAK service center.

035

OVER REGENERATION

 Acceleration/deceleration has been repeated too many times during rapid feeding. Reduce either the frequency of rapid-feed acceleration/deceleration or the rapid feedrate.

036

OVER SPEED 1

 The maximum permissible speed of motor or detector rotation has been exceeded. Reduce the motor speed. If this does not correct the alarm status, then the detector/cable, the servo amplifier, or the control card is defective; please contact the nearest MAZAK service center.

037

OVER AMPERE

 A ground short or an internal short has occurred to the motor power line. Or an overcurrent has flown through the servo amplifier circuit for more than a certain time. Locate and correct the shorted portion of the motor power line. If the alarm status still persists after that, please contact the nearest MAZAK service center.

Ошибки управления плк станков с ЧПУ

Аварийные сигналы 200-399 являются сигналами ПЛК (программируемого логического контроллера), сгенерированные для конкретной машины и могут отличаться. Если описание ошибки недостаточно для устранения проблемы, сделайте пометку и обратитесь в региональный сервисный центр за помощью.

Код
ошибки		ОписаниеУстранение

101

SOFT LIMIT +X

 During NC operation, linear axis movement is commanded beyond the +X limit regulated by parameter. Correct program data so that the machine will move within the soft limits.

102

SOFT LIMIT –X

 During NC operation, linear axis movement is commanded beyond the –X limit regulated by parameter. Correct program data so that the machine will move within the soft limits.

103

SOFT LIMIT +Y

 During NC operation, linear axis movement is commanded beyond the +Y limit regulated by parameter. Correct program data so that the machine will move within the soft limits.

104

SOFT LIMIT –Y

 During NC operation, linear axis movement is commanded beyond the –Y limit regulated by parameter. Correct program data so that the machine will move within the soft limits.

105

SOFT LIMIT +Z

 During NC operation, linear axis movement is commanded beyond the +Z limit regulated by parameter. Correct the program and other date so that the machine will move within the soft limits.

106

SOFT LIMIT –Z

 During NC operation, linear axis movement is commanded beyond the –Z limit regulated by parameter. Correct the program and other date so that the machine will move within the soft limits.

107

SOFT LIMIT +4th

 During NC operation, linear axis movement is commanded beyond the +4th-axis limit regulated by parameter. Correct the program and other date so that the machine will move within the soft limits.

108

SOFT LIMIT –4th

 During NC operation, linear axis movement is commanded beyond the –4th-axis limit regulated by parameter. Correct the program and other date so that the machine will move within the soft limits.

109

SOFT LIMIT +5th

 During NC operation, linear axis movement is commanded beyond the +5th-axis limit regulated by parameter. Correct the program and other date so that the machine will move within the soft limits.

110

SOFT LIMIT –5th

 During NC operation, linear axis movement is commanded beyond the –5th-axis limit regulated by parameter. Correct the program and other date so that the machine will move within the soft limits.

111

SOFT LIMIT +6th

 During NC operation, linear axis movement is commanded beyond the +6th-axis limit regulated by parameter. Correct program data so that the machine will move within the soft limits.

112

SOFT LIMIT –6th

 During NC operation, linear axis movement is commanded beyond the –6th-axis limit regulated by parameter. Correct program data so that the machine will move within the soft limits.

113

OVER TRAVEL +X

 The X-axis has reached its plus (+) stroke limit. Move the axis away from the end in manual operation mode.

114

OVER TRAVEL –X

 The X-axis has reached its minus (–) stroke limit. Move the axis away from the end in manual operation mode.

115

OVER TRAVEL +Y

 The Y-axis has reached its plus (+) stroke limit. Move the axis away from the end in manual operation mode.

116

OVER TRAVEL –Y

 The Y-axis has reached its minus (–) stroke limit. Move the axis away from the end in manual operation mode.

117

OVER TRAVEL +Z

 The Z-axis has reached its plus (+) stroke limit. Move the axis away from the end in manual operation mode.

118

OVER TRAVEL –Z

 The Z-axis has reached its minus (–) stroke limit. Move the axis away from the end in manual operation mode.

Ошибки работы дисплея

Код
ошибки		ОписаниеУстранение

401

ILLEGAL FORMAT

 The format of the input data is not an available one. (Example) Negative data has been input to an item that rejects negative data input. Press the clear key and then input correct data.

402

ILLEGAL NUMBER INPUT
  1. The work number of a display inhibiting program was specified.
  2. The numeric value that has been input is out of the allowable range.
  1. The operation concerned cannot be performed for the program of display inhibition (Program management function).
  2. Press the clear key and then input correct data.

403

PROGRAM TOO LARGE

 The limit of 250 lines per program has been exceeded. Recreate the program so that it consists of 250 lines or less.

404

MEMORY CAPACITY EXCEED
  1. Additional creation of a machining program is no longer possible since the memory has already been filled up to its machining-program data storage capacity
  2. Additional preparation of process control data is no longer possible since 100 sets of such data have already been stored.
  3. Additional preparation of program layout data is no longer possible since 1000 sets of such data have already been stored.
 Make an available storage area by either erasing an unnecessary machining program from the memory or saving a machining program onto an external storage, and then create a new machining program.

406

MEMORY PROTECT
  1. Inhibiting operation (editing, erasing, renumber and entry of names) has been performed for the edit-inhibiting program.
  2. PROGRAM LOCK/ENABLE switch on the operation panel is set to the LOCK position.
  1. The operation concerned cannot be performed for the edit-inhibiting program (Program management function).
  2. Set the PROGRAM LOCK/ENABLE switch to the ENABLE position.

407

DESIGNATED DATA NOT FOUND

 The number or character string that has been designated does not exist in the program. Designate an existent number or character string.

408

PROGRAM ERROR

 The memory contents in the machiningprogram data storage area have been destroyed. Delete the corresponding program.

409

ILLEGAL INSERTION

 Program data insertion is not possible. It is not possible to insert data before the common program unit.

410

ILLEGAL DELETION

 Program deletion is not possible. It is not possible to delete the common unit.

411

STOP POWER IN PROGRAM EDITING

 A portion of the program may have been destroyed because power has been turned off during program editing. Check the corresponding program for incorrect data, and correct the program data if an error(s) exists in it.

412

WPC NESTING OVER

 The number of repeats of subprogram nesting has exceeded nine times. Correct the program so that the total number of repeats of subprogram nesting becomes nine or less.

413

PROGRAM OVER

 The program registration has exceeded its maximum value available (up to 32 or 256 programs, depending on the type of model). Delete an unnecessary program(s) from the memory, or save all the necessary programs onto an external storage and then delete an unnecessary program.

414

AUTO CALCULATION IMPOSSIBLE

 Automatic calculation of circumferential speed and feedrate is not possible. Check and correct the tool sequence data or machining unit of the program.

416

AUTO PROCESS DIA EXCEED

 Tools cannot be automatically developed because of errors of the machining-unit data. Check and correct the machining-unit data.

419

AUTO TAP PROCESS IMPOSSIBLE

 The pitch or other data cannot be automatically set because of incorrectness of the tap nominal diameter in the tappingunit data. Check and correct the tapping-unit data and tapping-tool sequence data of the program.

420

DESIGNATION OVERLAP

An attempt has been made to input the same data as that which has already been registered.

  1. Pocket number in the TOOL LAYOUT
    display.
  2. Machining-program number (changed)
  3. Machining priority number
 Check and correct the data settings.

422

MEMORY PROTECT (I/O BUSY)

 An attempt has been made to edit or input the machining program, tool data, etc. during I/O operation. Wait until the I/O operation is completed, and then repeat the editing or input operation from the beginning.

423

EXCEEDED MAX NUMBER OF TOOLS

 During tool layout, the number of tools used in the designated program has exceeded the maximum available number per drum. Check and correct the corresponding machining program so that the maximum number of tools available for the drum is not exceeded.

Ошибки ввода/вывода данных

Код
ошибки		ОписаниеУстранение

501

ILLEGAL FORMAT ( , , )

 A cassette tape or floppy disk that contains data other than M2 or M32 data has been set. Set the cassette tape or floppy disk that contains M2 or M32 data.

502

LOAD IMPOSSIBLE (SIZE OVER) (WNO., , )

 The contents of the cassette tape or floppy disk are not correct. (Loading of a MAZATROL program of more than 250 lines of data has been attempted.) Either use another cassette tape (or floppy disk) or save the program data. After that, carry out a load operation once again.

503

LOAD IMPOSSIBLE (TOO MANY) (WNO., , )

 An attempt has been made to load more machining programs than the maximum number of programs that can be registered within the NC system. Delete unnecessary programs, or save the programs onto an external storage and then delete them. After that, load the particular program.

504

LOAD IMPOSSIBLE (AUTO OPE.) ( , , )

 An attempt has been made during automatic operation to load data other than machining programs. Load the data only after completion of automatic operation.

505

LOAD IMPOSSIBLE (MISMATCH) ( , , )

 Loading has been attempted although the data within the cassette tape or floppy disk does not match to the NC system. (Mismatching in data size, drum conditions, etc) Check if the data saved on the cassette tape or floppy disk is the data to be used for the machine currently in operation.

506

SAME PROGRAM APPOINT (WNO., , )

 An attempt has been made to load the machining program that has the same work number as that of a machining program registered within the NC system. Check for overlapping work numbers.

507

NO DESIGNATED PROGRAM (WNO., , )

 The machining program whose saving onto CMT has been attempted does not exist in the NC system. Check if the machining program with the specified work number exists in the NC system.

508

MEMORY CAPACITY EXCEEDED (WNO., , )

 An attempt has been made to load more machining programs than the maximum number of programs that can be registered within the NC system. Delete unnecessary programs, or save the programs onto an external storage and then delete them. After that, load the particular program.

509

MEMORY PROTECT ( , , )

 Loading has been attempted when the PROGRAM LOCK/ENABLE switch setting was LOCK. Set the switch to ENABLE, and then carry out the loading operation.

510

CONTENTS ARE NOT COINCIDENT (WNO., , )

 Comparison between the cassette tape or floppy disk contents and the NC memory contents has shown disparities in data size, type of file information, etc.
  1. Locate those disparities on the PROGRAM FILE display and correct them, and then make the comparison once again.
  2. If the disparities exist in data other than machining program data, check if the data is for the machine being used.

511

DATA ARE NOT COINCIDENT (WNO.,UNO.,SNO.)

 Comparison between the cassette tape or floppy disk contents and the NC data settings has shown several disparities. Note) For EIA/ISO programs, the number displayed in the UNO. position is a line number, which corresponds to the number displayed at the lower right corner of the WK. PROGRAM display.
  1. After correcting the disparities within the machining program, make the comparison once again.
  2. If the disparities exist in data other than machining program data, locate those disparities on each display. Note) This alarm message may be displayed if data is saved prior to automatic operation and then subjected to comparison with that after automatic operation. This is because execution of automatic operation may cause automatic data overriding.

512

DESIGNATED FILE NOT FOUND (WNO., , )

 The machining program or another data that has been designated for the LOAD or COMPARE operation does not exist within the cassette tape or floppy disk. Carry out a DIRECTORY operation to check what type of data is stored on the cassette tape or floppy disk.

513

PROG. SOFTWARE NOT COINCIDENT ( , , )

 An attempt has been made to load a machining program different in structure from the programs within the NC memory. Check if the contents of the cassette tape or floppy disk are for M32 or M2.

514

DESIGNATED DATA NOT COINCIDENT ( , , )

 An attempt has been made to load data (other than machining program data) that differs in structure from the NC memory data. Check if the contents of the cassette tape or floppy disk are for M32 or for the machine being used.

515

CMT MIS-CONNECTED ( , , )

 This message implies incorrect cable connection between CMT (cassette magnetic tape unit) or microdisk unit and the NC system, or implies a power-off status or an incorrect baud-rate setting. In the case of microdisk unit, this message also implies incorrect setting of a floppy disk.
  1. Check for correct cable connections.
  2. Check if power is turned on.
  3. Check for correct baud-rate setting. (Parameter for the NC system: G1)
  4. For microdisk unit, check if the floppy disk is correctly set.

516

SYSTEM ERROR ( , , )

 An error has occurred within the NC system. Please contact the nearest MAZAK service center. (At this time, also please notify them of what kind of operating procedure you had carried out before the alarm message appeared and what values were displayed in parentheses.)

517

PROG.OPERATION NOT ALLOWED (WNO., , )
  1. An attempt has been made to save a display inhibiting program. (Program management function)
  2. An attempt has been made to save the program being edited (or the program being loaded using another I/O unit).
  1. Check if the specified work number is for the program of display inhibition.
  2. Carry out a saving operation only after completion of the program editing operation (or the program loading operation using another I/O unit).

518

DATA OPERATION NOT ALLOWED ( , , )
  1. An attempt has been made during automatic operation to load data other than machining program data.
  2. An attempt has been made to save the data being loaded using another I/O unit.
  3. An attempt has been made to load the data being saved using another I/O unit.
 Wait until automatic operation has been completed (or until the loading or saving operation using another I/O unit has been completed).

Ошибки программирования режима автоматического цикла

Код
ошибки		ОписаниеУстранение

601

SYSTEM ERROR ( , , )

 A processing error has occurred within the NC system. Using CMT I/O, save the program data, tool data, tool file data, parameters, etc. that are currently being used. After that, please contact the nearest MAZAK service center.

602

PROG. DATA NOT ALLOWED ( , , )

 An attempt has been made to start the program being transferred. After the transfer operation is completed, start the program.

603

NO DESIGNATED PROGRAM (WNO.,UNO.,SNO.)

 The program having the work number that has been set in the subprogram unit does not exist within the memory. No work number has been set in the subprogram unit. The work number that has been designated as the restart position does not exist within the memory. Review the machining programs to see if the designated program exists.

604

NO PITCH IN MULTI WORKPIECES
(WNO.,UNO.,SNO.)

 Pitch X is not yet set in spite of the fact that multi-piece machining in the direction of the X-axis is to take place. Pitch Y is not yet set in spite of the fact that multi-piece machining in the direction of the Y-axis is to take place. Review the particular machining program and then set an appropriate multi-piece machining pitch in the common unit,

605

NO TOOL DATA IN PROGRAM (WNO.,UNO.,SNO.)

 The point-, line- or face-machining unit does not contain any tool sequences. Review the particular machining program to see if there are units that do not contain necessary tool sequences.

606

NO FIGURE IN PROGRAM (WNO.,UNO.,SNO.)

 The point-, line- or face-machining unit does not have any figure data. Review the particular machining program to see if there are units that do not contain necessary figure data.

607

MISSING INPUT DATA (POINT)
(WNO.,UNO.,SNO.)

 A point-machining unit lacks data. Review the particular machining program, and set data if a point-machining unit lacks data.

608

MISSING INPUT DATA (LINE) (WNO.,UNO.,SNO.)

 A line-machining unit lacks data. Review the particular machining program, and set data if a line-machining unit lacks data.

609

MISSING INPUT DATA (FACE) (WNO.,UNO.,SNO.)

 A face-machining unit lacks data. Review the particular machining program, and set data if a face-machining unit lacks data.

610

MISSING TOOL DATA FOR POINT
(WNO.,UNO.,SNO.)

 A point-machining tool sequence lacks data. Review the particular machining program, and set data if a point-machining tool sequence lacks data.

611

MISSING TOOL DATA FOR LINE
(WNO.,UNO.,SNO.)

 A line-machining tool sequence lacks data. Review the particular machining program, and set data if a line-machining tool sequence lacks data.

612

MISSING TOOL DATA FOR FACE
(WNO.,UNO.,SNO.)

 A face-machining tool sequence lacks data. Review the particular machining program, and set data if a face-machining tool sequence lacks data.

613

WPC UNIT INCOMPLETE (WNO.,UNO.,SNO.)

 The WPC unit lacks data. Review the particular machining program, and set data if the WPC unit lacks data.

614

WPC NESTING OVER (WNO.,UNO.,SNO.)

 The maximum permissible number of repeats of MAZATROL program nesting has been exceeded nine. Review and correct the particular machining program so that the total number of repeats of nesting does not excess nine.

615

OFS UNIT INCOMPLETE (WNO.,UNO.,SNO.)

 The offset unit lacks data. Review the particular machining program, and set data if the offset unit lacks data.

616

DATA ERROR IN M CODE UNIT (WNO.,UNO.,SNO.)

 The M code unit contains no data. Review the particular machining program, and input data to the M code unit.

617

EXECUTION IMPOSSIBLE (WNO.,UNO.,SNO.)

 The data processing operation cannot be performed because of contradiction in data. This condition occurs if an attempt is made to start automatic operation when the specified work number is an unregistered number. Search out the contradictory data making reference to WNO., UNO., SNO. (which are displayed together with the alarm message), and then correct the data.

618

POINT CUTTING PARAMETER ERROR
(WNO.,UNO.,SNO.)

 The point-machining parameter setting(s) is out of its permissible range.

Все возможные ошибки ЧПУ MAZAK MAZATROL M-32B в формате PDF

Скачать PDF

Устранение причины ошибки, и ее сброс на станке, оснащенным системой ЧПУ, позволит в кратчайшие сроки возобновить работу. К сожалению не все ошибки можно исправить самостоятельно, некоторые ошибки MAZAK возможно исправить только в специализированных сервисных центрах.

ЧПУ MAZAK программирование

Ремонт ЧПУ MAZAK

Наряду с ремонтом, специалисты сервисного центра «Кернел» выполняют программирование ЧПУ MAZAK и настройку параметров системы CNC. Подобную услугу мы оказываем не только на территории сервисного центра, также инженер компании может выполнить программирование ЧПУ MAZAK с выездом на территорию заказчика.

Настройка параметров, программирование CNC MAZAK является заключительным звеном в процессе ремонта ЧПУ и требует профессионального подхода. Именно финальный этап программирования ЧПУ MAZAK наглядно покажет качество выполненного ремонта CNC.

К слову, мы уделяем особое внимание качеству, и смело даем гарантию на все выполненные ремонтно-восстановительные работы шесть месяцев, гарантия так же распространяется на запасные части, которые были заменены в процессе ремонта.

Хочется обратить внимание на то, что мы стараемся провести ремонт и программирование ЧПУ MAZAK в максимально сжатые сроки, тем самым минимизируя простой дорогостоящего промышленного оборудования.

Инструкция по программированию ЧПУ MAZAK описана в руководстве пользователя, которое вы можете скачать с нашего сайта.

Скачать руководство по программированию ЧПУ MAZAK MAZATROL FUSION 640M в формате PDF

Скачать PDF

Скачать руководство по программированию ЧПУ MAZAK MAZATROL FUSION 640T NEXUS в формате PDF

Скачать PDF

Скачать руководство по программированию ЧПУ MAZAK MAZATROL CAM M-2 в формате PDF

Скачать PDF

Скачать руководство по программированию ЧПУ MAZAK MAZATROL CAM T-2 & T-3 в формате PDF

Скачать PDF

Скачать макропрограммирование под Mazatrol в формате PDF

Скачать PDF

CNC MAZAK ввод в эксплуатацию

Ремонт CNC MAZAK

Инженеры сервисного центра «Кернел» не только выполняют качественный ремонт CNC MAZAK и программирование ЧПУ. Так же мы предоставляем услугу запуска в эксплуатацию оборудования от стадии проектирования до выпуска первой продукции.

Именно этап запуска в эксплуатацию ЧПУ MAZAK отвечает за долгий и безаварийный процесс работы промышленного оборудования, тем самым позволяя получить максимальную прибыль и сэкономить на незапланированном ремонте.

По-настоящему качественный ввод в эксплуатацию CNC MAZAK может выполнить только высококвалифицированный специалист с богатым опытом работы в данном направлении. Найти подобного специалиста достаточно сложно, но, если вы обращаетесь в наш сервисный центр, вам не придется об этом думать.

В нашей команде работают исключительно профессионалы своего дела, а за время существования нашей компании мы ввели в эксплуатацию не один десяток систем ЧПУ в том числе и MAZAK, с каждым разом получая и накапливая драгоценный опыт.

О MAZAK

Ремонт CNC MAZAK

Компания Yamazaki Mazak была основана в 1919 году и с тех пор вносит свой вклад в развитие станкостроительной индустрии в качестве одного из ведущих игроков.

Чтобы поддерживать свое лидерство Mazak производит не только самое современное оборудование - многоцелевые станки, токарные центры с ЧПУ, обрабатывающие центры и станки лазерной резки, но также и системы автоматизации с возможностью обработки детали за один установ, тем самым обеспечивая высокий уровень производительности и универсальности рабочего процесса.

На сегодняшний день компания Mazak выпускает следующюю продукцию:

  • Многоцелевые станки;
  • Токарные центры с ЧПУ, Вертикальные обрабатывающие центры;
  • Двухколонные обрабатывающие центры;
  • Горизонтальные обрабатывающие центры;
  • Станки лазерной резки;
  • ГПС (гибкие производственные системы);
  • Системы ЧПУ, Системы автоматизированного проектирования и программирования;
  • Программное обеспечение производства.

Команда Mazak будет и дальше разрабатывать инновационное металлообрабатывающее оборудование, отвечающее производственным требованиям заказчиков по всему миру.

Оставить заявку на ремонт ЧПУ MAZAK в Кульсарах

Оставить заявку на ремонт MAZAK в Кульсарах можно с помощью специальной формы, которая вызывается нажатием одноименной кнопки в верхней части страницы. Все вопросы, связанные с ремонтом или программированием MAZAK в вы можете задать нашим менеджерам. Связаться с ними можно несколькими способами:

  • Заказав обратный звонок (кнопка в правом нижнем углу сайта)
  • Посредством чата (кнопка расположена с левой стороны сайта)
  • Позвонив по номеру телефона:
    • +7(8482) 79-78-54;
    • +7(8482) 55-96-39;
    • +7(917) 121-53-01
  • Написав на электронную почту: 89171215301@mail.ru

Вот далеко не полный список производителей промышленной электроники и оборудования, ремонтируемой в нашей компании.

Похожие статьи