Ошибки и ремонт ЧПУ MAZAK в Пайтуге
Ремонт CNC MAZAK
Компания «Кернел» производит ремонт станков оснащеных системой ЧПУ MAZAK с 2002 года. За это время мы восстановили десятки станков оборудованных данными системами, и накопили колоссальный опыт в том числе опыт в ремонте CNC MAZAK. Ремонт подобной промышленной электроники ответственное и сложное занятие, требующие полной отдачи и профессионализма, а так же максимально полной материальной базе.
Ремонт ЧПУ MAZAK в Пайтуге производится как в сервисном центре, так и с выездом специалиста на территорию заказчика. ЧПУ MAZAK, является крайне сложной промышленной электроникой, соответственно ремонт CNC MAZAK можно доверить только настоящим профессионалам своего дела, с богатым опытом работы в данном направлении.
Все специалисты сервисного центра "Кернел" имеют высшее техническое образование, огромный опыт и максимально полную материальную базу включая новейшее высокотехнологичное диагностическое оборудование, благодаря чему ремонт ЧПУ MAZAK в Пайтуге проходит максимально эффективно.
Инженеры сервисного центра уделяют максимальное внимание к качеству исполнения ремонта, программирования и настройке ЧПУ, не зависимо от производителя данного промышленного оборудования. Именно поэтому мы смело даем гарантию на ремонт CNC MAZAK, гарантия также распространяется на замененные в процессе ремонта компоненты и составляет шесть месяцев.
Особое внимание заслуживает тот факт, что ремонт ЧПУ MAZAK в Пайтуге производится исключительно с использованием оригинальных запасных частей, на компонентном уровне с применением высокотехнологичного оборудования, квалифицированным персоналом с инженерным образованием.
Если на вашем производстве появились проблемы с ЧПУ MAZAK, которые вы не можете решить самостоятельно, мы всегда рады вам помочь. Обращайтесь в сервисный центр "Кернел".
Специалисты нашей компании в минимальные сроки проведут глубокую диагностику ЧПУ и последующий ремонт CNC MAZAK. Оставьте заявку на ремонт ЧПУ MAZAK в Пайтуге, используя форму на сайте.
Коды ошибок ЧПУ MAZAK MAZATROL M-32B
Ошибки процессора системы NC
Код ошибки | Описание | Устранение |
---|---|---|
001 WATCH DOG 1 |
The NC system was not able to process data within unit processing time. | Please contact the nearest MAZAK service center. |
002 SYSTEM ERROR |
A problem has occurred in the NC system software. | Please contact the nearest MAZAK service center. |
003 MEMORY PARITY |
The contents of the memory within the NC system (operation instructions or data) have been destroyed. | Please contact the nearest MAZAK service center. |
004 MEMORY GUARD |
A defect(s) is encountered in the system software or custom option software. | Please contact the nearest MAZAK service center. |
005 ZERO DIVISION |
Illegal data (such as zero-division) is included in either the parameter, machining program or other data. | Check the parameter set, machining program etc. for correctness. |
006 SYSTEM LOADING ERROR |
The system software stored on the floppy disk has been destroyed . Or a malfunction has occurred in the floppy disk unit. | The floppy disk or the disk unit (including the card) needs replacing. Please contact the nearest MAZAK service center. |
007 SUM CHECK (CRC) ERROR |
The contents of the system software and/or custom software have been destroyed. | Please contact the nearest MAZAK service center. |
008 BATTERY ALARM |
The battery provided to retain parameters, machining programs and other types of data within the NC system has reached the minimum voltage level permissible or has run down. | Make sure to check the machining data for possible loss and that the battery is recharged or replaced. For battery recharging or replacement, refer to the relevant description given in the Maintenance Manual. |
009 SPNDL.CONTROL. (IC MAC 012) ALARM |
The IC MAC 012 on the control printedcircuit board has not correctly operated. | Replace the SF-CA card. |
010 SPNDL SPEED ERROR |
The difference between the designated speed and the motor speed has exceeded the required value because of:
|
For 1. above, reduce the load. For 2. above, replace the speed detection encoder. For 3. above, replace the FS-CA card. |
011 WATCH DOG 1 |
The NC system was not able to process data within unit processing time. | Please contact the nearest MAZAK service center. |
012 SYSTEM ERROR |
An error(s) has occurred in the software of the NC system. | Please contact the nearest MAZAK service center. |
013 MEMORY PARITY |
The contents of the memory within the NC system (operation instructions or data) have been destroyed. | Please contact the nearest MAZAK service center. |
014 MEMORY GUARD |
A defect(s) is included in the system software or custom software. | Please contact the nearest MAZAK service center. |
015 ZERO DIVISION |
Illegal data (such as zero-division data) is included in either the parameter set, machining program or other types of data. | Check if “0” data is included in the parameter set, machining program or other types of machining data, and then correct it if such data is present. |
016 SYSTEM LOADING ERROR |
The system software stored on the floppy disk has been destroyed. Or a malfunction has occurred in the floppy disk unit. | The floppy disk or the disk unit (including the card) needs replacing. Please contact the nearest MAZAK service center. |
017 SUM CHECK (CRC) ERROR |
The contents of the system software and/or custom software have been destroyed. | Turn power off and then back on. If this does not clear the error status, please contact the nearest MAZAK service center. |
018 BATTERY ALARM |
The NC system battery provided to retain parameter, machining program and other types of data has reached the minimum permissible voltage level. | It is required that the machining data is rechecked for possible damage when the battery is recharged or replaced. For the battery recharging or replacement procedure, please see the Maintenance Manual. |
Ошибки привода оси и шпинделя
Код ошибки | Описание | Устранение |
---|---|---|
019 SPNDL CONTROL. (BREAKER TRIP) |
Electrical current exceeding the set value has occured (Spindle converter circuits)
|
|
020 SPNDL (CONVERTER OVERCURRENT) |
Electrical current exceeding the set value has occured (Spindle converter circuits)
|
|
021 INSUFFICIENT VOLTAGE |
The three-phase input supply voltage has decreased below 160V (±5V). | Check the input voltage, and then increase it to 200/220V (+10 -15%) |
022 MOMENTAR, POWER DOWN |
The supply voltage has temporarily decreased below the minimum permissible level. | Adjust the power supply. |
023 ILLEGAL MEMORY 1 |
A malfunction(s) has occurred in the control card of the servo amplifier, the internal cables or the connectors. | Please contact the nearest MAZAK service center. |
024 EXTERNAL CLOCK MALFUNCTION |
A malfunction(s) has occurred in the NC, the servo amplifier control card, the internal cables or the connectors. | Please contact the nearest MAZAK service center. |
025 WATCH DOG |
A malfunction(s) has occurred in the NC, the servo amplifier control card, the internal cables or the connectors. | Please contact the nearest MAZAK service center. |
026 ILLEGAL MEMORY 2 |
A malfunction(s) has occurred in the NC, the servo amplifier control card, the internal cables or the connectors. | Please contact the nearest MAZAK service center. |
027 MAGNETIC POSITION DETECT MALF |
A malfunction(s) has occurred either in the detectors (or cables) fitted to the servo motor or in the servo amplifier. Or the machine parameter settings for the servo system include an error(s). | Please contact the nearest MAZAK service center. |
028 PRINT CIRCUIT BOARD MALF |
A malfunction(s) has occurred in the control card of the servo amplifier. | Please contact the nearest MAZAK service center. |
029 DETECTING NO SIGNAL 1 |
A malfunction(s) has occurred either in the detectors (or cables) fitted to the servo motor or in the servo amplifier. Or the machine parameter settings for the servo system include an error(s). | Please contact the nearest MAZAK service center. |
030 DETECTING NO SIGNAL 2 |
A malfunction(s) has occurred either in the detectors (or cables) or the servo amplifier. Or the machine parameter settings for the servo system include an error(s). | Please contact the nearest MAZAK service center. |
031 DETECTING NO SIGNAL 3 |
A malfunction(s) has occurred either in the detectors (or cables) or the servo amplifier. Or the machine parameter settings for the servo system include an error(s). | Please contact the nearest MAZAK service center. |
033 DETECTING NO SIGNAL 5 |
- | - |
034 BATTERY MALFUNCTION |
The absolute-value detector circuit backup battery for the servo amplifier control card has run down. | Please contact the nearest MAZAK service center. |
035 OVER REGENERATION |
Acceleration/deceleration has been repeated too many times during rapid feeding. | Reduce either the frequency of rapid-feed acceleration/deceleration or the rapid feedrate. |
036 OVER SPEED 1 |
The maximum permissible speed of motor or detector rotation has been exceeded. | Reduce the motor speed. If this does not correct the alarm status, then the detector/cable, the servo amplifier, or the control card is defective; please contact the nearest MAZAK service center. |
037 OVER AMPERE |
A ground short or an internal short has occurred to the motor power line. Or an overcurrent has flown through the servo amplifier circuit for more than a certain time. | Locate and correct the shorted portion of the motor power line. If the alarm status still persists after that, please contact the nearest MAZAK service center. |
Ошибки управления плк станков с ЧПУ
Аварийные сигналы 200-399 являются сигналами ПЛК (программируемого логического контроллера), сгенерированные для конкретной машины и могут отличаться. Если описание ошибки недостаточно для устранения проблемы, сделайте пометку и обратитесь в региональный сервисный центр за помощью.
Код ошибки | Описание | Устранение |
---|---|---|
101 SOFT LIMIT +X |
During NC operation, linear axis movement is commanded beyond the +X limit regulated by parameter. | Correct program data so that the machine will move within the soft limits. |
102 SOFT LIMIT –X |
During NC operation, linear axis movement is commanded beyond the –X limit regulated by parameter. | Correct program data so that the machine will move within the soft limits. |
103 SOFT LIMIT +Y |
During NC operation, linear axis movement is commanded beyond the +Y limit regulated by parameter. | Correct program data so that the machine will move within the soft limits. |
104 SOFT LIMIT –Y |
During NC operation, linear axis movement is commanded beyond the –Y limit regulated by parameter. | Correct program data so that the machine will move within the soft limits. |
105 SOFT LIMIT +Z |
During NC operation, linear axis movement is commanded beyond the +Z limit regulated by parameter. | Correct the program and other date so that the machine will move within the soft limits. |
106 SOFT LIMIT –Z |
During NC operation, linear axis movement is commanded beyond the –Z limit regulated by parameter. | Correct the program and other date so that the machine will move within the soft limits. |
107 SOFT LIMIT +4th |
During NC operation, linear axis movement is commanded beyond the +4th-axis limit regulated by parameter. | Correct the program and other date so that the machine will move within the soft limits. |
108 SOFT LIMIT –4th |
During NC operation, linear axis movement is commanded beyond the –4th-axis limit regulated by parameter. | Correct the program and other date so that the machine will move within the soft limits. |
109 SOFT LIMIT +5th |
During NC operation, linear axis movement is commanded beyond the +5th-axis limit regulated by parameter. | Correct the program and other date so that the machine will move within the soft limits. |
110 SOFT LIMIT –5th |
During NC operation, linear axis movement is commanded beyond the –5th-axis limit regulated by parameter. | Correct the program and other date so that the machine will move within the soft limits. |
111 SOFT LIMIT +6th |
During NC operation, linear axis movement is commanded beyond the +6th-axis limit regulated by parameter. | Correct program data so that the machine will move within the soft limits. |
112 SOFT LIMIT –6th |
During NC operation, linear axis movement is commanded beyond the –6th-axis limit regulated by parameter. | Correct program data so that the machine will move within the soft limits. |
113 OVER TRAVEL +X |
The X-axis has reached its plus (+) stroke limit. | Move the axis away from the end in manual operation mode. |
114 OVER TRAVEL –X |
The X-axis has reached its minus (–) stroke limit. | Move the axis away from the end in manual operation mode. |
115 OVER TRAVEL +Y |
The Y-axis has reached its plus (+) stroke limit. | Move the axis away from the end in manual operation mode. |
116 OVER TRAVEL –Y |
The Y-axis has reached its minus (–) stroke limit. | Move the axis away from the end in manual operation mode. |
117 OVER TRAVEL +Z |
The Z-axis has reached its plus (+) stroke limit. | Move the axis away from the end in manual operation mode. |
118 OVER TRAVEL –Z |
The Z-axis has reached its minus (–) stroke limit. | Move the axis away from the end in manual operation mode. |
Ошибки работы дисплея
Код ошибки | Описание | Устранение |
---|---|---|
401 ILLEGAL FORMAT |
The format of the input data is not an available one. (Example) Negative data has been input to an item that rejects negative data input. | Press the clear key and then input correct data. |
402 ILLEGAL NUMBER INPUT |
|
|
403 PROGRAM TOO LARGE |
The limit of 250 lines per program has been exceeded. | Recreate the program so that it consists of 250 lines or less. |
404 MEMORY CAPACITY EXCEED |
|
Make an available storage area by either erasing an unnecessary machining program from the memory or saving a machining program onto an external storage, and then create a new machining program. |
406 MEMORY PROTECT |
|
|
407 DESIGNATED DATA NOT FOUND |
The number or character string that has been designated does not exist in the program. | Designate an existent number or character string. |
408 PROGRAM ERROR |
The memory contents in the machiningprogram data storage area have been destroyed. | Delete the corresponding program. |
409 ILLEGAL INSERTION |
Program data insertion is not possible. | It is not possible to insert data before the common program unit. |
410 ILLEGAL DELETION |
Program deletion is not possible. | It is not possible to delete the common unit. |
411 STOP POWER IN PROGRAM EDITING |
A portion of the program may have been destroyed because power has been turned off during program editing. | Check the corresponding program for incorrect data, and correct the program data if an error(s) exists in it. |
412 WPC NESTING OVER |
The number of repeats of subprogram nesting has exceeded nine times. | Correct the program so that the total number of repeats of subprogram nesting becomes nine or less. |
413 PROGRAM OVER |
The program registration has exceeded its maximum value available (up to 32 or 256 programs, depending on the type of model). | Delete an unnecessary program(s) from the memory, or save all the necessary programs onto an external storage and then delete an unnecessary program. |
414 AUTO CALCULATION IMPOSSIBLE |
Automatic calculation of circumferential speed and feedrate is not possible. | Check and correct the tool sequence data or machining unit of the program. |
416 AUTO PROCESS DIA EXCEED |
Tools cannot be automatically developed because of errors of the machining-unit data. | Check and correct the machining-unit data. |
419 AUTO TAP PROCESS IMPOSSIBLE |
The pitch or other data cannot be automatically set because of incorrectness of the tap nominal diameter in the tappingunit data. | Check and correct the tapping-unit data and tapping-tool sequence data of the program. |
420 DESIGNATION OVERLAP |
An attempt has been made to input the same data as that which has already been registered.
|
Check and correct the data settings. |
422 MEMORY PROTECT (I/O BUSY) |
An attempt has been made to edit or input the machining program, tool data, etc. during I/O operation. | Wait until the I/O operation is completed, and then repeat the editing or input operation from the beginning. |
423 EXCEEDED MAX NUMBER OF TOOLS |
During tool layout, the number of tools used in the designated program has exceeded the maximum available number per drum. | Check and correct the corresponding machining program so that the maximum number of tools available for the drum is not exceeded. |
Ошибки ввода/вывода данных
Код ошибки | Описание | Устранение |
---|---|---|
501 ILLEGAL FORMAT ( , , ) |
A cassette tape or floppy disk that contains data other than M2 or M32 data has been set. | Set the cassette tape or floppy disk that contains M2 or M32 data. |
502 LOAD IMPOSSIBLE (SIZE OVER) (WNO., , ) |
The contents of the cassette tape or floppy disk are not correct. (Loading of a MAZATROL program of more than 250 lines of data has been attempted.) | Either use another cassette tape (or floppy disk) or save the program data. After that, carry out a load operation once again. |
503 LOAD IMPOSSIBLE (TOO MANY) (WNO., , ) |
An attempt has been made to load more machining programs than the maximum number of programs that can be registered within the NC system. | Delete unnecessary programs, or save the programs onto an external storage and then delete them. After that, load the particular program. |
504 LOAD IMPOSSIBLE (AUTO OPE.) ( , , ) |
An attempt has been made during automatic operation to load data other than machining programs. | Load the data only after completion of automatic operation. |
505 LOAD IMPOSSIBLE (MISMATCH) ( , , ) |
Loading has been attempted although the data within the cassette tape or floppy disk does not match to the NC system. (Mismatching in data size, drum conditions, etc) | Check if the data saved on the cassette tape or floppy disk is the data to be used for the machine currently in operation. |
506 SAME PROGRAM APPOINT (WNO., , ) |
An attempt has been made to load the machining program that has the same work number as that of a machining program registered within the NC system. | Check for overlapping work numbers. |
507 NO DESIGNATED PROGRAM (WNO., , ) |
The machining program whose saving onto CMT has been attempted does not exist in the NC system. | Check if the machining program with the specified work number exists in the NC system. |
508 MEMORY CAPACITY EXCEEDED (WNO., , ) |
An attempt has been made to load more machining programs than the maximum number of programs that can be registered within the NC system. | Delete unnecessary programs, or save the programs onto an external storage and then delete them. After that, load the particular program. |
509 MEMORY PROTECT ( , , ) |
Loading has been attempted when the PROGRAM LOCK/ENABLE switch setting was LOCK. | Set the switch to ENABLE, and then carry out the loading operation. |
510 CONTENTS ARE NOT COINCIDENT (WNO., , ) |
Comparison between the cassette tape or floppy disk contents and the NC memory contents has shown disparities in data size, type of file information, etc. |
|
511 DATA ARE NOT COINCIDENT (WNO.,UNO.,SNO.) |
Comparison between the cassette tape or floppy disk contents and the NC data settings has shown several disparities. Note) For EIA/ISO programs, the number displayed in the UNO. position is a line number, which corresponds to the number displayed at the lower right corner of the WK. PROGRAM display. |
|
512 DESIGNATED FILE NOT FOUND (WNO., , ) |
The machining program or another data that has been designated for the LOAD or COMPARE operation does not exist within the cassette tape or floppy disk. | Carry out a DIRECTORY operation to check what type of data is stored on the cassette tape or floppy disk. |
513 PROG. SOFTWARE NOT COINCIDENT ( , , ) |
An attempt has been made to load a machining program different in structure from the programs within the NC memory. | Check if the contents of the cassette tape or floppy disk are for M32 or M2. |
514 DESIGNATED DATA NOT COINCIDENT ( , , ) |
An attempt has been made to load data (other than machining program data) that differs in structure from the NC memory data. | Check if the contents of the cassette tape or floppy disk are for M32 or for the machine being used. |
515 CMT MIS-CONNECTED ( , , ) |
This message implies incorrect cable connection between CMT (cassette magnetic tape unit) or microdisk unit and the NC system, or implies a power-off status or an incorrect baud-rate setting. In the case of microdisk unit, this message also implies incorrect setting of a floppy disk. |
|
516 SYSTEM ERROR ( , , ) |
An error has occurred within the NC system. | Please contact the nearest MAZAK service center. (At this time, also please notify them of what kind of operating procedure you had carried out before the alarm message appeared and what values were displayed in parentheses.) |
517 PROG.OPERATION NOT ALLOWED (WNO., , ) |
|
|
518 DATA OPERATION NOT ALLOWED ( , , ) |
|
Wait until automatic operation has been completed (or until the loading or saving operation using another I/O unit has been completed). |
Ошибки программирования режима автоматического цикла
Код ошибки | Описание | Устранение |
---|---|---|
601 SYSTEM ERROR ( , , ) |
A processing error has occurred within the NC system. | Using CMT I/O, save the program data, tool data, tool file data, parameters, etc. that are currently being used. After that, please contact the nearest MAZAK service center. |
602 PROG. DATA NOT ALLOWED ( , , ) |
An attempt has been made to start the program being transferred. | After the transfer operation is completed, start the program. |
603 NO DESIGNATED PROGRAM (WNO.,UNO.,SNO.) |
The program having the work number that has been set in the subprogram unit does not exist within the memory. No work number has been set in the subprogram unit. The work number that has been designated as the restart position does not exist within the memory. | Review the machining programs to see if the designated program exists. |
604 NO PITCH IN MULTI WORKPIECES |
Pitch X is not yet set in spite of the fact that multi-piece machining in the direction of the X-axis is to take place. Pitch Y is not yet set in spite of the fact that multi-piece machining in the direction of the Y-axis is to take place. | Review the particular machining program and then set an appropriate multi-piece machining pitch in the common unit, |
605 NO TOOL DATA IN PROGRAM (WNO.,UNO.,SNO.) |
The point-, line- or face-machining unit does not contain any tool sequences. | Review the particular machining program to see if there are units that do not contain necessary tool sequences. |
606 NO FIGURE IN PROGRAM (WNO.,UNO.,SNO.) |
The point-, line- or face-machining unit does not have any figure data. | Review the particular machining program to see if there are units that do not contain necessary figure data. |
607 MISSING INPUT DATA (POINT) |
A point-machining unit lacks data. | Review the particular machining program, and set data if a point-machining unit lacks data. |
608 MISSING INPUT DATA (LINE) (WNO.,UNO.,SNO.) |
A line-machining unit lacks data. | Review the particular machining program, and set data if a line-machining unit lacks data. |
609 MISSING INPUT DATA (FACE) (WNO.,UNO.,SNO.) |
A face-machining unit lacks data. | Review the particular machining program, and set data if a face-machining unit lacks data. |
610 MISSING TOOL DATA FOR POINT |
A point-machining tool sequence lacks data. | Review the particular machining program, and set data if a point-machining tool sequence lacks data. |
611 MISSING TOOL DATA FOR LINE |
A line-machining tool sequence lacks data. | Review the particular machining program, and set data if a line-machining tool sequence lacks data. |
612 MISSING TOOL DATA FOR FACE |
A face-machining tool sequence lacks data. | Review the particular machining program, and set data if a face-machining tool sequence lacks data. |
613 WPC UNIT INCOMPLETE (WNO.,UNO.,SNO.) |
The WPC unit lacks data. | Review the particular machining program, and set data if the WPC unit lacks data. |
614 WPC NESTING OVER (WNO.,UNO.,SNO.) |
The maximum permissible number of repeats of MAZATROL program nesting has been exceeded nine. | Review and correct the particular machining program so that the total number of repeats of nesting does not excess nine. |
615 OFS UNIT INCOMPLETE (WNO.,UNO.,SNO.) |
The offset unit lacks data. | Review the particular machining program, and set data if the offset unit lacks data. |
616 DATA ERROR IN M CODE UNIT (WNO.,UNO.,SNO.) |
The M code unit contains no data. | Review the particular machining program, and input data to the M code unit. |
617 EXECUTION IMPOSSIBLE (WNO.,UNO.,SNO.) |
The data processing operation cannot be performed because of contradiction in data. This condition occurs if an attempt is made to start automatic operation when the specified work number is an unregistered number. | Search out the contradictory data making reference to WNO., UNO., SNO. (which are displayed together with the alarm message), and then correct the data. |
618 POINT CUTTING PARAMETER ERROR |
The point-machining parameter setting(s) is out of its permissible range. |
Все возможные ошибки ЧПУ MAZAK MAZATROL M-32B в формате PDF |
Устранение причины ошибки, и ее сброс на станке, оснащенным системой ЧПУ, позволит в кратчайшие сроки возобновить работу. К сожалению не все ошибки можно исправить самостоятельно, некоторые ошибки MAZAK возможно исправить только в специализированных сервисных центрах.
ЧПУ MAZAK программирование
Наряду с ремонтом, специалисты сервисного центра «Кернел» выполняют программирование ЧПУ MAZAK и настройку параметров системы CNC. Подобную услугу мы оказываем не только на территории сервисного центра, также инженер компании может выполнить программирование ЧПУ MAZAK с выездом на территорию заказчика.
Настройка параметров, программирование CNC MAZAK является заключительным звеном в процессе ремонта ЧПУ и требует профессионального подхода. Именно финальный этап программирования ЧПУ MAZAK наглядно покажет качество выполненного ремонта CNC.
К слову, мы уделяем особое внимание качеству, и смело даем гарантию на все выполненные ремонтно-восстановительные работы шесть месяцев, гарантия так же распространяется на запасные части, которые были заменены в процессе ремонта.
Хочется обратить внимание на то, что мы стараемся провести ремонт и программирование ЧПУ MAZAK в максимально сжатые сроки, тем самым минимизируя простой дорогостоящего промышленного оборудования.
Инструкция по программированию ЧПУ MAZAK описана в руководстве пользователя, которое вы можете скачать с нашего сайта.
Скачать руководство по программированию ЧПУ MAZAK MAZATROL FUSION 640M в формате PDF |
|
Скачать руководство по программированию ЧПУ MAZAK MAZATROL FUSION 640T NEXUS в формате PDF |
|
Скачать руководство по программированию ЧПУ MAZAK MAZATROL CAM M-2 в формате PDF |
|
Скачать руководство по программированию ЧПУ MAZAK MAZATROL CAM T-2 & T-3 в формате PDF |
|
Скачать макропрограммирование под Mazatrol в формате PDF |
CNC MAZAK ввод в эксплуатацию
Инженеры сервисного центра «Кернел» не только выполняют качественный ремонт CNC MAZAK и программирование ЧПУ. Так же мы предоставляем услугу запуска в эксплуатацию оборудования от стадии проектирования до выпуска первой продукции.
Именно этап запуска в эксплуатацию ЧПУ MAZAK отвечает за долгий и безаварийный процесс работы промышленного оборудования, тем самым позволяя получить максимальную прибыль и сэкономить на незапланированном ремонте.
По-настоящему качественный ввод в эксплуатацию CNC MAZAK может выполнить только высококвалифицированный специалист с богатым опытом работы в данном направлении. Найти подобного специалиста достаточно сложно, но, если вы обращаетесь в наш сервисный центр, вам не придется об этом думать.
В нашей команде работают исключительно профессионалы своего дела, а за время существования нашей компании мы ввели в эксплуатацию не один десяток систем ЧПУ в том числе и MAZAK, с каждым разом получая и накапливая драгоценный опыт.
О MAZAK
Компания Yamazaki Mazak была основана в 1919 году и с тех пор вносит свой вклад в развитие станкостроительной индустрии в качестве одного из ведущих игроков.
Чтобы поддерживать свое лидерство Mazak производит не только самое современное оборудование - многоцелевые станки, токарные центры с ЧПУ, обрабатывающие центры и станки лазерной резки, но также и системы автоматизации с возможностью обработки детали за один установ, тем самым обеспечивая высокий уровень производительности и универсальности рабочего процесса.
На сегодняшний день компания Mazak выпускает следующюю продукцию:
- Многоцелевые станки;
- Токарные центры с ЧПУ, Вертикальные обрабатывающие центры;
- Двухколонные обрабатывающие центры;
- Горизонтальные обрабатывающие центры;
- Станки лазерной резки;
- ГПС (гибкие производственные системы);
- Системы ЧПУ, Системы автоматизированного проектирования и программирования;
- Программное обеспечение производства.
Команда Mazak будет и дальше разрабатывать инновационное металлообрабатывающее оборудование, отвечающее производственным требованиям заказчиков по всему миру.
Оставить заявку на ремонт ЧПУ MAZAK в Пайтуге
Оставить заявку на ремонт MAZAK в Пайтуге можно с помощью специальной формы, которая вызывается нажатием одноименной кнопки в верхней части страницы. Все вопросы, связанные с ремонтом или программированием MAZAK в вы можете задать нашим менеджерам. Связаться с ними можно несколькими способами:
- Заказав обратный звонок (кнопка в правом нижнем углу сайта)
- Посредством чата (кнопка расположена с левой стороны сайта)
- Позвонив по номеру телефона:
- +7(8482) 79-78-54;
- +7(8482) 55-96-39;
- +7(917) 121-53-01
- Написав на электронную почту: 89171215301@mail.ru
Вот далеко не полный список производителей промышленной электроники и оборудования, ремонтируемой в нашей компании.
![](https://www.remontservo.ru/img/proizvoditeli/001.jpg)
![](https://www.remontservo.ru/img/proizvoditeli/002.jpg)
![](https://www.remontservo.ru/img/proizvoditeli/003.jpg)
![](https://www.remontservo.ru/img/proizvoditeli/004.jpg)
![](https://www.remontservo.ru/img/proizvoditeli/005.jpg)
![](https://www.remontservo.ru/img/proizvoditeli/006.jpg)
![](https://www.remontservo.ru/img/proizvoditeli/007.jpg)
![](https://www.remontservo.ru/img/proizvoditeli/008.jpg)
![](https://www.remontservo.ru/img/proizvoditeli/009.jpg)
![](https://www.remontservo.ru/img/proizvoditeli/001.jpg)